FrostbiteGlacier-257: 1 PCS(Frostbite*1 PCS+Glacier*1 PCS -257mm)
FrostbiteGlacier-257: 2 PCS(Frostbite*2 PCS+Glacier*2 PCS -257mm)
Why CryoGrip Pro Glacier?
- Exceptional Adhesion
- Lower Temp Printing
- Long-Lasting Durability
- Hi-temp Resistant
- Compatible with Various Filament
- Double-Sided
- Easy Model Removal
- Multiple Sizes
Which plate is right for you?
Frostbite
Surface Finishes:Rough Texture Better Grip
G.S.I*:10
Cold Print Material Compatibility:Compatible only with PLA and PETG, offering extremely good cold printing adhesion.PLA 30-50°C,PETG 50-70°C
Engineering Material Compatibility:Not compatible with materials besides PLA & PETG.
Use Case Scenario Recommendations:Dedicated Plate to print PLA & PETG Only
Other Features:AR Code printed
Cleaning Methods:Water and Soap Only
Glacier
Surface Finishes:Smooth Texture
G.S.I*:8
Cold Print Material Compatibility:Excels with most engineering materials, with good cool printing adhesion, but not as good as Frostbite with PLA and PETG.PLA 45-55°C,PETG 60-75°C
Engineering Material Compatibility:Compatible with All materials with nozzle
temperatures below 300°C
Use Case Scenario Recommendations:
-
Excels at engineering materials like PA.
-
Print PLA,PETG,ABS,PA and other engineering materials.
-
All rounder plate for different filament exploration. Significantly more adhesion than PEl but slightly less than Frostbite with PLA and PETG.
-
May require brim for some parts.
Other Features:AR Code sticker,Heat-isolating Handle
Cleaning Methods:Water and Soap,Alcohol
*Grip Strength Index—Refer to the Material Comaptibility Chart for more details.
Revolutionary 7 – Layer Design Achieve Superior Print Stability
1 Base Plate
580HV Hardness, highly ferromagnetic spring steel with strong magnetic holding to physically constrain your print from warping. No more worrying about the edge of the build plate lifting during large prints.
2,5 Base Coat
Ultra-strong bonding agent ensures excellent adhesion between the top coat and spring steel, with zero risk of peeling even after repeated bending.
3,6 Intermediate Coating
Impact-resistant, corrosion-resistant, and long-lasting with no risk of damage from nozzle probing.
4,7 Top Coat
Porous Oleophobic Polymer Coating – Attracts filament at the molecular level for ultra-strong adhesion, eliminating print failures due to detachment. Achieve 100% adhesion without heating, using half the energy.
Self-Cleaning Property – Reduces the negative impact of accidental fingerprints on adhesion performance.
Superior Adhesion,
Minimal Heat Required
CryoGrip Pro Glacier provides superior adhesion for PLA & PETG at lower bed
temperatures, significantly minimizing warping in large prints. When printing at high
temperatures, it greatly improves adhesion for engineering filaments like PA-CF. With
excellent heat resistance, it’s compatible with various filament and offers
long-lasting durability.
Scratch-Resistant & Self-Recovering for Ultimate Durability
A simple wipe restores its adhesion.
*You can use water and soap, or alcohol, to clean the plate.
Zero Wait: Instant Plate Removal Post-Print
The sleek honeycomb handle design isolates heat from the print area. At a 100°C
heatbed temperature, the temperature in the handle area remains low enough to
touch, enabling immediate print removal without cooldown. Keep your projects
moving smoothly.
Effortless Print Removal Bend and Pop!
The CryoGrip Pro series provides excellent adhesion while still allowing prints to be easily removed by bending the plate. For larger or more intricate prints, use a
scraper to gently lift the edges, then pry them off carefully. If a print sticks too firmly, place the plate in a freezer for 10 minutes to assist with removal.
Find Your Compatible Model
The CryoGrip Pro Glacier offers warp-free printing of PLA & PETG at lower
temperatures. This allows you to keep the auxiliary fan on and eliminate concerns
about drafts affecting your prints, even in open models like the P1P and A1.
AR Code Sticker
Includes a sheet of AR code stickers, made of Hi-Temp base material. Choose your own AR code according to the material that you print most often.
Installation Steps
Step 1: Align the plate with the fixed points (highlighted in red) on the platform.Either side can face up.
Step 2: Lower the plate onto the magnetic platform and secure it in place.
Why CryoGrip Pro Frostbite?
- Exceptional Adhesion
- RoomTemp Printing
- No More Clog
- Long-Lasting Durability
- Energy Saver
- Compatible Filament
- Double-Sided
- Easy Model Removal
Panda Build Plate/CryoGrip/CryoGrip Pro Frostbite
- Room-temp superior adhesion
- No heating required,Great energy savings
- Say goodbye to clogs, eliminating extruder maintenance
-
Excellent adhesion with PLA and PETG
- Vastly improved success rate due to stable adhesion
- Exceptionally durable and heat-resistant
Unmatched Adhesion, Zero Heat
CryoGrip Pro Frostbite delivers unparalleled adhesion for PLA and PETG at room temperature, reducing warping of large prints and remaining scratch and wear-resistant over long periods of time.
Scratch-Resistant & Self-Recovering for Ultimate Durability
A simple wipe restores its adhesion.
*Please use water + soap only to clean the plate. Do not use solvents(e.g., alcohol) as these may cause permanent surface damage.
Cool and Clog Free
Uniquely designed to print PLA at low temperature, the CryoGrip Pro Frostbite prevents your filament from softening and slipping in the extruder due to high chamber temperatures.
Pandas Love Bamboo
Compatible with Bambu Lab P1P, P1S, X1C, X1E and A1 printers, the CryoGrip Pro Frostbite offers warp-free printing of PLA & PETG at room temperature. This allows you to keep the auxiliary fan on and eliminate concerns about drafts affecting your prints, even in open models like the P1P and A1.
Intricate Markings AR Code for Bed Detection
An AR code is included on the build plate to ensure it is recognized by the XIC, eliminating setup errors for a hassle-free printing experience.
Why CryoGrip?
- Exceptional Adhesion
- RoomTemp Printing
- Energy Saver
- No More Clog
- Double-Sided
- Easy Model Removal
- Intricate Texture
- Fully Compatible
CryoGrip Coating Breakthrough Technology
Discover the CryoGrip Buildplate — a technological breakthrough in 3D printing adhesion. Developed from a unique polymer, this build plate leads the market with unmatched stability and results, surpassing traditional PEI solutions.
Unmatched Adhesion, Zero Heat
Experience unparalleled first-layer adhesion with our CryoGrip BuildPlate,engineered to secure your prints firmly at room temperature. Enjoy flawless printing results with no warping.
Zero Heat,Zero Clogs
Uniquely designed to print PLA at ambient temperatures, the CryoGrip Build Plate effectively prevents clogs caused by extruder overheating.
Effortless Print Removal Bend and Pop!
Simply bend the surface slightly, and your finished print detaches cleanly without the need for scraping or prying tools.
Pandas Love Bamboo
Compatible with Bambu Lab P1P, P1S, XIC, and A1 printers, the CryoGrip Buildplate ensures warp-free printing of various filaments at room temperatures. This allows you to keep the auxiliary fan on and eliminate concerns about drafts affecting your prints, even in open models like the P1P and A1.
Specifications
Dimensions：257mm x 257mm
Compatibility：For Bambu Lab P1P,P1S,X1C,X1E,A1
Why PANDA BUILDPLATE？
- Double-Sided
- Intricate Texture
- High-Temperature Resistance
- Exceptional Adhesion
- Easy Model Removal
- Printed Grid
Explore Your Ideal Texture
- PET CF & Textured PEI：Carbon Fiber Pattern (Smooth Finish)&Textured PEI
- Dual Textured PEI：Textured PEI
- PEO & Textured PEI：Diamond Pattern (Smooth Finish) & Textured PEI
- Textured & Smooth PEI：Smooth PEI & Textured PEI
Superior Durability and Heat Resistance
The Panda BuildPlate is engineered with exceptional durability and heat resistance, ensuring long-lasting performance and consistent results.
PEI Suggested Filaments：PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC, Nylon, Nylon-CF
PET CF/PEO Suggested Filaments：PLA, PETG, TPU
PEI Suggested Bed Temp：PLA/TPU: 50-60℃、PETG: 70-80℃、ABS: 80-100℃
PET CF/PEO Suggested Bed Temp：PLA/TPU: 50-70℃、PETG: 70-80℃
*Optimize your printing results by choosing the appropriate surface textures based on the different filament.
Specifications
Dimensions：184mm x 184mm/257mm x 257mm
Compatibility：For Bambu Lab P1P,P1S,X1C,X1E,A1,A1 MINI
Reviews
There are no reviews yet.